|
|
|
---------------------------------------------------------------------------------------------- |
MILD STEEL
|
Range of Pipes & Tubes
|
|
Sr. No. |
Material |
Size
|
Class & Thickness |
Specification |
Manufacturer |
|
1. |
M. S. & G. I. |
15 NB
To 150 NB
|
A, B, C Class |
IS 1239 |
Tata, Zenith, Jindal,
Mukat, Lloyds, Lalit Profiles Etc. |
|
200 NB
To 500 NB
|
4.85 mm
To 12.7 mm Thk.
|
IS 3589
(Fe 330, Fe 410) |
|
Note |
|
Special Tube |
:- |
Saw
Pipes Tube & Steam Pipes, Precision Tubes, Fabricated Pipe
(with radiography)
|
|
In
Form of |
:- |
Round, Square, Rectangle, Oval, Coil, Flexible Pipe, Shaft, ‘U’ Shape,
Hydraulic Tube & Horn Tube.
|
|
In
Length of |
:- |
Standard length & In Cut length also. |
|
Other Services |
:- |
Draw & Expansion as per required Size & Length, Heat
Treatment, Bending, Galvanizing, Anneling & Pickled, Sand Blasting,
Machining (CNC) Etc. |
|
Test Certificate |
:- |
Manufacturer Test Certificate / Laboratory Test
Certificate from Govt. Approved Lab. & Under Third Party Inspection with
Excise Gate Pass
to avail Modvat benefit. |
|
Specialize |
:- |
Square Tube, Rectangle Tube & Odd Size |
|
Range of Buttweld [B/W] Fitting
|
|
Sr. No. |
Material |
Size |
Class & Thickness |
Specification |
Item |
|
1. |
M.
S. & G. I.
|
15 NB
To
150 NB
|
‘B' Class
&
'C' Class
|
IS 4310
Welded
ANSI B16.9
|
§ Bend
(Long & Short)
§ Elbow (180o, 90o & 45o)
§ Tee (Equal & Unequal)
§ Reducer (Con & Ecc)
§ CAP
§ Stubend (Long & Short)
§ Nipple (Barrel)
|
|
200 NB
To 500 NB
|
6.35 mm
To 8 mm Thk.
|
ISI Mark |
|
Range of Forged Fitting
|
|
Sr. No. |
Material |
Size |
Class |
Specification |
Item |
|
1. |
Forged
Fittings
|
15 NB
To
100 NB
|
3000
6000
& 9000 LBS
|
IS, BS, ASTM
ANSI B16.11
S/W & SCRD
(As per Gauge) (NPT / BSP / BSPT)
|
§ Elbow - 90o & 45o
§ Tee - Equal & Reducing
§ Union
§ Cross
§ Coupling - Full & Half
§ Socket Reducing § CAP
§ Plug-Hex & Square
§ Nipples (Hex/Reducing)
§ Bushing
§ Sokolet, Weldolet,
Thredolet, Elbolet &
Nipolet
|
|
Range of Flanges
|
|
Sr.No. |
Material |
Size |
Class |
Specification |
Item |
|
1. |
Forged Flanges
|
15 NB
To 750 NB
|
150, 300, 600,
900 & 1500
LBS |
ANSI B16.5 |
Flanges, SORF, WNRF, BLRF,
SWRF, LAP Joint, Threaded, Reducing |
|
2. |
Plate Flanges |
15 NB
To
500 NB
|
ASA 150, 300
Table D, E, F, H, DIN, ND-6, 10, 16, 25, 40 |
IS 2002
ANSI B16.5
|
SORF, BLRF, LAP Joint
&
Spectacle |
|
Note |
|
Other Forms |
:- |
Compression Fitting / Instrumentation / Hydraulic Fitting / Also As Per
Drawing. |
|
Other Services |
:- |
Maching (CNC),
Threading (As per Gauge), Galvanising, Sand Blasting Etc. |
|
Test Certificate |
:- |
Manufacturer Test
Certificate / Laboratory Test Certificate from Govt. Approved Lab. & Under
Third Party Inspection with Excise Gate Pass to
avail Modvat benefit.
|
|
Range of Sheet, Plate, Strip, Flat & Blank
|
|
Sr. No. |
Material |
Size
|
Thickness |
Specification |
Manufacturer |
|
1. |
Mild Steel |
1220 mm x 4880 mm
1500 mm x 6300 mm
2000 mm x 10000mm
2500 mm x 10000mm
|
1 mm
To 150 mm
|
IS 2062 |
SAIL, Lloyds, Jindal,
Essar, Shah Alloys, Ispat Etc. |
|
2. |
GI |
1220 mm x 2440 mm 1220 mm x 6000 mm
1500 mm x 6300 mm
|
1 mm
To
20 mm
|
DIN, BS, IS
EN Series
|
|
Note |
|
Other Grade |
:- |
CRCA, Spring Steel,
Silver Steel Etc. |
|
Sheet Finishing |
:- |
HR, CR Etc. |
|
Sheet & Plate in Form of |
:- |
Coils, Chequred Plate,
Perforated Sheet, Strip, Blank (Circle), Ring (Flange), Flats, Angle,
Channel, ‘T’, I Beam, Tray Etc. |
|
Other Services |
:- |
Heat Treatment, Anneling, Pickling, Electroplating,
Anodising, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc. |
|
Test Certificate |
:- |
Manufacturer Test
Certificate / Laboratory Test Certificate from Govt. Approved Lab. & Under
Third Party Inspection with Excise Gate Pass to
avail Modvat benefit.
|
|
Range of Bar [Rod] & Wire
|
|
Sr. No. |
Material |
Diameter |
Length |
Specification |
Manufacturer |
|
1. |
Mild Steel &
EN Series
|
1 mm
To
500 mm
|
50 mm Long
To
6000 mm Long
|
IS
BS
DIN
|
Super Forging |
|
Note |
|
Mild Steel in Grade |
:- |
Gr. 1008, 1010, 1015,
1020, CK35, CK45, CK55, CK60 Etc. |
|
EN in Grade |
:- |
EN-1A, EN-3B, EN-8,
EN-9, EN-16, EN-18, EN-19, EN-24,
EN-29B, EN-31, EN-32B, EN-36, EN-36C,
EN-42J, EN-45,
EN-47, EN-48A, EN-100, EN-111, EN-202, EN-352, EN-353,
EN-1117 Etc. |
|
Bar Finishing |
:- |
Bright, Polish & Black |
|
Bar in Form of |
:- |
Round, Square, Hex
(A/F), Rectangle, Wire (Coil Form), Wiremesh, Billet, Ingot, Casting, TMT
Etc. , |
|
Other Services |
:- |
Machining (CNC), Heat Treatment, Anneling, Pickling,
Polish, Electroplating, Anodising, Rolling, Forging, Cutting, Bending, Minor
Fabrication, |
|
Test Certificate |
:- |
Laboratory Test
Certificate from Govt. Approved Lab. &
Under Third Party Inspection
|
|
|
|
|
|
